Mon - Fri: 7:00am - 4:00pm | Sat: by appointment

Ferrocrete Laterite Road Gravel, Delivered Across Perth

Laterite road gravel, also spelt ferricrete. Nominal 12mm, binds down hard for drives and tracks.

Road Base Quarry Direct Approx. 1.7 t per m³ Perth metro delivery
Ferrocrete (12mm) close up, supplied and delivered across Perth by Red Sand Supplies
Ferrocrete (12mm) in use on a Perth job, supplied and delivered across Perth by Red Sand Supplies

Ferrocrete, also spelt ferricrete, is laterite road gravel carrying its own natural fines. We run it at a nominal 12mm, and it can be supplied from 7mm up to 18mm depending on the job.

Wet it down and roll it and those fines bind the stone into a firm, low dust running surface that sheds water, which is why it has been the country driveway and farm track material in WA for generations.

What Ferrocrete (12mm) is used for

  • Country driveways
  • Farm tracks and laneways
  • Rural road resheeting
  • Hardstands and parking areas
  • Shed pads and access ways

Specifications

GradingNominal 12mm, available from 7mm up to 18mm
MaterialNatural laterite gravel with binding fines
ColourWarm tan through red brown
CompactionBinds and compacts hard with water and rolling
Also known asFerricrete, laterite road gravel, ironstone gravel
Approx. density1.7 tonnes per m³ loose
CoverageAbout 5.9 m² per tonne at 100mm depth
SuppliedQuarry Direct, sourced from trusted WA quarries and pits
DeliveryPerth metro on our own fleet, or pick up from Hope Valley

Density here is our best estimate, not a weighed figure. Ring the yard if it matters for your job.

Buying and delivery

Sold by the cubic metre or tonne, delivered and tipped by our own fleet, or picked up from Hope Valley. Supplied to order, and available in a range of gradings from 7mm to 18mm, so tell us the size you need and we'll confirm stock.

Not sure how much you need? The volume calculator works out cubic metres and tonnes from your measurements and drops the result straight into a quote request. At 100mm deep, one tonne of ferrocrete (12mm) covers about 5.9 square metres.

Request a quote for Ferrocrete (12mm) Work out quantities

Questions

Questions about Ferrocrete (12mm)

How much ferrocrete do I need for a driveway?

It weighs around 1.7 tonnes per cubic metre. A driveway 4 metres wide, 15 metres long compacted to 100mm needs about 6 cubic metres, roughly 10.2 tonnes. Use our calculator to check your own driveway.

What size does ferrocrete come in?

We run it at a nominal 12mm, and it can be supplied anywhere from 7mm up to 18mm depending on what the job calls for.

Is ferrocrete the same as ferricrete?

Yes, ferrocrete and ferricrete are the same material, also known as laterite road gravel or ironstone gravel.

How does ferrocrete bind down?

Wet it and roll it and the natural iron rich fines bind the stone into a firm, low dust running surface that sheds water.

Also in Road Base

Related products

Gravel Road Base (-19mm)

Screened -19mm laterite gravel that binds hard into a classic red country driveway.

View Gravel Road Base (-19mm) »

Gravel Road Base (-10mm)

Finer -10mm laterite gravel that knits into a tight, smooth surface for drives and paths.

View Gravel Road Base (-10mm) »

Blue Metal Road Base

Crushed granite road base from Byford, the heavy duty pick for structural pavements.

View Blue Metal Road Base »

Limestone (19mm)

19mm crushed limestone, the standard Perth base under paving, driveways and crossovers.

View Limestone (19mm) »

Limestone (75mm)

Big 75mm crushed limestone for sub-base bulk, haul roads and site access.

View Limestone (75mm) »

Need Ferrocrete (12mm) delivered in Perth?

Send a quote request and we will come back with a firm delivered price, or call the yard.

☎ Call Now Get a Quote